Series 4 Ultra Help Articles
1. Remove the plastic wrap from one CR2 3-volt lithium battery. Insert the battery into the battery compartment. 2. Look through the eyepiece and turn the focus dial clockwise or counterclockwise until the image is sharp. 3. Press the Power/Start but
1. Locate and open or unscrew the battery compartment door. 2. Remove the plastic wrap from one of the CR2 3-volt lithium batteries provided. 3. Insert the battery into the battery compartment with the negative (flat) end first. The positive end will
Press the Mode Button once to switch between Scan Mode and Active Track Mode. Press the Mode Button for three (3) seconds to change the measurement unit (Yard/Meter). Press the Mode Button twice to access or leave the Brightness Control option. o. Pr
In Active Track Mode, the Slope Switch allows users to turn the Slope function on and off. When in the off position, users will conform to USGA tournament play rules (USGA Rule 14-3). The red background indicates the Slope function is turned on. The
The Brightness Control allows users to change the light display brightness manually to their preferred settings based on the environment. In high-light settings, the display is best shown in a brighter setting. In low-light settings, the display is b
The Series 4 Ultra rangefinder contains Blue Tees Golf’s strongest magnet design and a newly developed thermoplastic elastomer material to create the most secure attachment to the golf cart/bar. The built-in magnetic strip attaches to the cart or any
To help ensure a consistent and accurate distance measurement, the following tips are recommended:
The lens of the laser rangefinder is fully multi-coated for the highest light transmission. As with any multi-coated optics, special care must be taken when cleaning the lens. Follow these tips for proper lens cleaning:. NOTE:
If you have lost or damaged the battery door to your rangefinder, please send us a picture of the damaged item so we can assist you further. Once we receive the picture and understand the damage, we will do our best to resolve this problem as soon as
If the unit does not turn on or the display does not illuminate:. If the unit powers down (the display goes blank when attempting to power the laser): •. If the flag (target) range cannot be obtained:.